A Study on Approaches for Measuring Outstanding Stress

  • Basavaraj Kawdi Mechanical Engineering Department, BKIT Bhalki ,India
  • Vrushabha C M Gogte Institute of Technology, Belagavi ,India
Keywords: Residual Stresses, Destructive Methods, Semi Critical Methods, Non-Destructive Methods

Abstract

Enduring stresses are one of the key factors in shaping the engineering belongings of parts and structural constituents. This fact plays a momentous role, for example, in fatigue of welded elements. Many different procedures and distinctions of means for measuring residual stresses have been advanced to ensemble various specimen geometries and measurement purposes. The several specific methods have grew over several decades and their practical applications have greatly benefited from the development of complementary technologies, notably in material cutting, full-field deformation measurement techniques, numerical methods and computing power. These matching technologies have stimulated advances not only in measurement accuracy and reliability, but also in range of application; much greater detail in residual stresses measurement is now available. The purpose of this review is to classify the different methods and to provide an overview of some of the recent advances in the area of residual stress measurement and act as a summary document to aid technique selection between destructive, semi destructive and non- destructive techniques for residual stresses. For each method scope, physical limitation, advantages and disadvantages are summarized. In the end this paper indicates some promising directions for futuredevelopments.

References

Anawa EM, Olabi AG.(2008). Control of welding residual stress for dissimilar laser welded materials. Journal of materials processing technology,204:22-33.

JLu. (2013).Handbook of Measurement of Residual stresses. SEM, Bethel.ISBN: 978- 0132557382; 1:319-322.

Kandil FA, Lord JD.(2011).A review of residual stress measurement methods, a guide to technique selection. NPL Report MAT; (A):04.

Kiel S.(2012). Experimental determination of residual stresses with the ring-core method and an online measuring system. Exp Tech. .16(5):17-24.

Lachmann C, Nitschke-Pagel Th, Wohlfahrt H.(2012).Non- destructive characterization of fatigue processes in cyclically loaded welded joints by the Barkhausen noise method. Stanford University: 2nd International Workshop on Structural Health Monitoring;

Milbradt KP. (2011).Ring-method determination of residual stresses. Proc SESA.9(1):63-74.

Macherauch E, Kloos KH. (2013).Origin, Measurements and Evaluation of Residual Stresses. Residual Stresses in Science and Technology, 3-26.

Olabi AG, Hashmi MSJ.(1996). Stress relief procedures for low carbon steel welded components, Journal of Materials Processing Technology, 56: 552-562.

Totten G. (2012).Handbook on residual stress. SEM, Bethel .1:417. ISBN: 978-0871707291

Trufyakov V, Mikheev P, Kudryavtsev Y. (2009).Fatigue Strength of Welded Structures. London: Harwood Academic, 100.

Published
2019-04-16
How to Cite
Kawdi, B., & M, V. (2019). A Study on Approaches for Measuring Outstanding Stress. American International Journal of Multidisciplinary Scientific Research, 5(2), 1-4. https://doi.org/10.46281/aijmsr.v5i2.248
Section
Research Paper/Theoretical Paper/Review Paper/Short Communication Paper